Raspberry Pi 3B with new DVB TV µHAT

Saturday morning, we got home and found my new µHAT waiting for me on the door mat from The Pi Hut at £22.99 including delivery.

I grabbed the nearest Raspberry Pi 3B that wasn’t already being used for a project.

IMG_2087

IMG_2088

Unboxing the Hat… Not much in there.

IMG_2089

The hat, some standoffs/spacers, an ariel socket, a header extension and some screws for the standoffs.

IMG_2090

Fir the header extension.

IMG_2093

Push the Hat onto the GPIO pins on your Pi. Screw the spacers into place. I couldn’t use the third spacer on my model of Pi as there is no hole to attach. Push the ariel socket into place on the end of the Hat until it clicks and locks in place.

IMG_2094IMG_2095

The guide says use the latest the version of Raspbian. My Pi already had a fairly recent o/s, so I decided to boot it up and do the updates.

IMG_2096

Wanted to find the unique serial number for my Pi..

IMG_2097

Started doing the updates…

IMG_2099IMG_2100IMG_2101IMG_2102

Updates all done, ran the command to install the TV software.

IMG_2103

And it failed.

IMG_2104

So started again from scratch but this time started with a fresh copy of the latest Raspbian image. It worked this time.

IMG_2105IMG_2106

Omce installed, a wizard starts and asks you to create login credentials for the administrator.

IMG_2107IMG_2108IMG_2109

Once the TV software is installed on the Pi, it acts as a streaming TV server which you can access from other computers. You are asked to go to a PC and enter a URL to access the server remotely but this didn’t work. Tried again but using the Pi’s IP address and you receive a login request for the administrator credentials you set up earlier.

IMG_2110

Then the wizard starts for configuring the TV software and channels. I found it fairly intuitive but here is the full guide.

IMG_2111IMG_2112IMG_2113IMG_2115IMG_2116IMG_2117IMG_2118IMG_2119IMG_2120IMG_2121IMG_2122IMG_2123

After the software finds the channels, you click on a TV icon next to one of them and here I am watching BBC One on my Laptop being streamed from the Raspberry Pi.

IMG_2124

 

Advertisements

Sega Outrun 2019 Megadrive TV Game

Bought this from Ebay for about £10 used.

Its based on the original Sega Megadrive game, Outrun 2019 but is built into a little console you plug into your TV using RCA cables.

The main console plugs in to the TV, is powered batteries and has a wire attached to a handheld gamepad that looks a little like a racing wheel. You hold it in your hand and the wheel sort of slides up and down to move the racing car left and right. There are some other buttons for additional functions like turbo and accelerate. It uses original graphics and is quite good fun if you remember playing original Megadrive games.

Made by Radica in about 2004. This is a self-contained little Sega Genesis, Megadrive console running this one game. 25 courses and 5 different levels. Radica made a range of LCD and retro console games like this.