Sunfounder DIY Arcade Kit

I first saw these online some time ago but they have been out of stock or quite expensive to get hold of in the company. Finally, Ali Express had a fantastic deal on and it was actually cheaper for me to buy from them with shipping from the US.

Bought this in January for $35.99. Cheaper than I can get in the U.K. Delivery was quoted as up to 40 days but I think I had to wait for about 10 days so was very happy with this.

This is a kit to make an arcade machine using a Raspberry Pi computer. It comes with everything you need except the Raspberry Pi and the software including:

1 x Arcade Joystick Kit (screws and fixing plates included)

6 x Arcade Buttons

1 x Paper Box

1 x 8G Micro SD Card

1 x Raspberry Pi GPIO Reference Card

1 x Guide Brochure

Several Wires

The box arrived well packaged and already looked funky from the outside. I decided to take this into work and get my students to help build it and learn some maker skills. Beow is what the kit looks like when taken out of the outer packaging. You can see the precut holes for buttons and joystick with the colourful artwork. Although this is just a printed cardboard box it still felt fairly rigid and like it will take a reasonable amount of abuse.

IMG_4124

Once opened there is some foam packing to keep everything in place and momentarily hide the goodies underneath.

IMG_4125.JPG

This quickly gives way to the goodies inside. Everything seemed well packaged and in separate compartments to make it easier to identify everything.

IMG_4126.JPG

Here’s the contents:

The buttons just push fit into the precut holes in the box.

IMG_4131.JPG

You then need to take the four screws out that secure the top plate of joystick so it can be fitted into the top of the box:

IMG_4132IMG_4133IMG_4134IMG_4135

The kit even includes a little GPIO reference board that slips over the pins to help ensure you connect the wires correctly – a nice little touch.

IMG_4136.JPG

IMG_4139

After this, its time to connect the buttons and joystick together. The Raspberry Pi just sit sin the bottom of the box although we plan to secure it better using some sticky pads of some kind.

 

IMG_4138.JPG

And the finished hardware setup..

IMG_4140

Follow this guide for downloading and installing RetroPie onto the free SD card supplied with the kit. Don’t forget you will need an SD card reader/writer and Etcher installed on a PC to write the RetroPie image to the SD card.

The kit comes with full instructions to help set up the Raspberry Pi and the controls..

IMG_4146IMG_4145IMG_4144IMG_4143IMG_4141

I will update the post later this week when we finish the setup and copy some game ROM’s (legalley owned of course) onto the RetroPie setup. More to follow….

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Advertisements

Published by

Paul Clews

Lecturer in IT at East Berkshire College. Assessor & Verifier Technology Evangelist Hacker Tinkerer Collector of all things Retro Cyclist Kayaker Adventurer

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s